National Plumbing logo with red and blue text, tagline reads Plumbing and Heating Solutions
Gas Pipe Installation

Gas Pipe Installation Across Bedfordshire, Hertfordshire, Buckinghamshire and North London

Gas pipe installation must be carried out by a Gas Safe registered engineer. We install new gas pipework, extend existing supplies and run gas pipes for new appliances across Bedfordshire, Hertfordshire, Buckinghamshire and North London.

Gas Pipe Installation Services

Professional gas pipework installation by Gas Safe registered engineers.

New Gas Pipe Installation

Installation of new gas pipework for a new gas appliance, a kitchen extension or a property that needs a gas supply where one does not currently exist.

Gas Supply to New Appliance

Running a gas supply pipe to a new gas cooker, gas hob, gas fire, boiler or other gas appliance. We install the pipework and fit an isolation valve and connection point.

Gas Pipe for Kitchen Extension

Installing gas pipework in a new or extended kitchen to supply a gas hob, gas cooker or range cooker. We coordinate with your kitchen fitter for a clean installation.

External Gas Pipe Installation

Installation of gas pipework outside the property, in trenches or fixed to external walls. External gas pipework must be properly protected and installed by a Gas Safe engineer.

Gas Meter to Appliance Pipe Run

Installing gas pipework from the gas meter to the appliance location. We calculate the correct pipe size based on the gas load and the length of the pipe run.

Gas Pipe in New Build Property

Installation of gas carcassing and final connections in new build residential properties. We work with builders and developers to install gas pipework to the correct specification.

What Our Gas Pipe Installation Includes

Survey the property and assess gas load requirements
Calculate correct pipe size for the gas appliances
Plan the pipe route and agree with you
Install gas pipework to the correct standard
Fit isolation valves at each appliance connection point
Pressure test the gas pipework for soundness
Purge the pipework and commission gas appliances
Issue a gas pipework installation certificate

Why Choose Us for Gas Pipe Installation

Gas Safe Registered

Every gas pipe installation is carried out by a Gas Safe registered engineer. Gas pipework must be installed correctly to be safe and legal.

Pressure Tested

We pressure test every gas pipe installation to confirm there are no leaks before the pipework is connected to the gas supply and appliances.

Correct Pipe Sizing

We calculate the correct pipe diameter based on the gas load, the pipe run length and the number of appliances. Undersized pipework causes poor appliance performance.

Local Across Four Counties

Our gas pipe installation engineers cover Bedfordshire, Hertfordshire, Buckinghamshire and North London.

Areas We Cover

Gas Pipe Installation Near You

Our gas pipe installation engineers cover homes across four counties.

Gas Pipe Installation FAQs

Common questions about gas pipe installation

Who can install gas pipework?

Only a Gas Safe registered engineer can install, alter or extend gas pipework. It is illegal and dangerous for anyone else to carry out gas pipework installation. Always ask to see the engineer's Gas Safe ID card.

What pipe material is used for gas pipework?

Copper pipe is the most common material for domestic gas pipework. Steel or tracpipe may be used for longer runs or commercial installations. The material must be suitable for gas and installed to the correct standard.

How is gas pipe size calculated?

The pipe diameter is calculated based on the total gas load of all connected appliances, measured in kilowatts, and the length of the pipe run from the meter. Undersized pipework causes poor flame performance and appliance faults.

Can gas pipes be buried in walls or floors?

Yes, but gas pipes buried in walls or floors must be protected against corrosion and mechanical damage. They must be sleeved where they pass through walls and properly identified as a gas pipe.

How long does gas pipe installation take?

A simple gas pipe installation for a single appliance typically takes 2 to 4 hours. Running pipework across a larger property, in multiple rooms or externally will take longer. We can give an estimate after seeing the property.

Do you issue a certificate for gas pipe installation?

Yes. We issue a gas pipework installation certificate that documents the pipe size, the pressure test result and confirms the installation complies with gas safety regulations.

Gas Pipe Installation Enquiry

Tell us what you need and we will arrange a gas pipe installation.

Prefer to call? 0330 043 3748